Oct 18, 2018 15:18 JST

Source: Mitsubishi Heavy Industries, Ltd.

Mitsubishi Heavy Industries Machine Tool Co., Ltd. to Release New Gear Grinding Machines, "ZE16C" and "ZE26C"
- Greater Structural Rigidity, Shorter Non-cutting Time, Lower Running Costs -

- Response to increasing demand for electric vehicle and robot applications
- Full-scale market launch with demonstration at JIMTOF 2018

TOKYO, Oct 18, 2018 - (JCN Newswire) - Mitsubishi Heavy Industries Machine Tool Co., Ltd. (MAT), a Group company of Mitsubishi Heavy Industries, Ltd. (MHI) based in Ritto, Shiga Prefecture in Japan, has developed two new gear grinding machines, the "ZE16C" and "ZE26C." The new machines are capable of higher-speed, higher-precision finishing and suited for mass-production. The new models were developed in response to rising demand for high-precision gears used in today's increasingly complex electric vehicles and reduction gears used in robots. By suppressing the gear-tooth shape error measurement to 1micrometer, the transmission units and gear reducer units' (where the gears are used) fuel performance is enhanced and quieter operation is achieved. The new ZE16C and ZE26C gear grinding machines will be on exhibit at the 29th Japan International Machine Tool Fair (JIMTOF 2018), held at Tokyo Big Sight (Tokyo International Exhibition Center) on November 1, marking the full-scale market launch of the new models.

Gear Grinding Machine "ZE16C"
 


The ZE16C and ZE26C offer significantly higher performance than the highly acclaimed, preceding "ZE-B" series models (ZE15B and ZE24B). They can respectively accommodate gears with maximum outer diameters of 160 and 260 mm. In addition to faster and more precise machining, non-cutting time is reduced to roughly half that of the earlier models, enabling greater production capabilities and lower running costs. Furthermore, environmental performance and energy savings can be improved with adoption of the industry's first water-soluble coolant system (optional).

Higher grinding precision and stability are achieved thanks to various structural enhancements: these include a newly developed gantry-type counter column (ZE16C), greater rigidity in the table and grinding wheel heads, and a revamped main spindle structure. Productivity has been improved through reduced non-cutting time and faster grinding wheel head rotation speed. In addition, by expanding the maximum wheel width to 160 mm (from 125 mm on earlier models), frequency of wheel replacement is reduced and simultaneous mounting of standard and polishing grinding wheels becomes possible, enabling response to a variety of in-factory needs.
At JIMTOF, the new ZE16C will be on display and perform a gear grinding demonstration (dry run). A demonstration will also be given of MAT's "DIASCOPE" monitoring system, which uses IoT technology to give visibility of real-time production status.

Today, demand for more precise gear finishing and mass production of precision gears is rising amid the shift to electric vehicles, enhancements in noise and fuel performance, and moves toward low-cost production. In addition, most recently demand is expanding for robot reduction gears as development of versatile robots gather momentum. The new ZE-C series has been launched to respond to this growing trend of gear grinding machines requiring ever-higher speed and precision.

Going forward, MAT-the manufacturer with the No.1 market share for gear grinding machines in Japan-will continue to focus on achieving further improvements in technologies and equipment relating to gear grinding.

Contact:
Corporate Communication Department
Mitsubishi Heavy Industries, Ltd.
Email: mediacontact_global@mhi.co.jp
Tel: +81-(0)3-6716-2168
Fax: +81-(0)3-6716-5860
Source: Mitsubishi Heavy Industries, Ltd.
Sectors: Engineering

Copyright ©2024 JCN Newswire. All rights reserved. A division of Japan Corporate News Network.

Related Press Release


Mitsubishi Power Achieves #1 Global Gas Turbine Market Share in 2023
March 15 2024 17:34 JST
 
MHI Establishes GX Solutions Business Domain to Promote Energy Transition Business Growth Strategy
March 14 2024 12:30 JST
 
MHI Selected as Licensor of CO2 Capture Technology for Leading Low Carbon Hydrogen Production Project in Cheshire, UK
March 13 2024 10:30 JST
 
MHI Thermal Systems to Launch 31 Models of Residential-use Air-Conditioners for the Japanese Market in 2024
March 11 2024 15:35 JST
 
MHI Develops an Onboard AI-Based Object Detector Utilizing a Next-Generation Space-Grade MPU
March 06 2024 17:02 JST
 
MHI Thermal Systems to Add "Hydrolution PRO" Series of Air-cooled Heat Pump Chillers to its Product Lineup for the European Market
March 06 2024 16:05 JST
 
Mitsubishi Heavy Industries Invests in Fervo Energy, a US-Based Enhanced Geothermal System Startup
March 01 2024 20:10 JST
 
MHI Group Presents "Best Innovation 2023" Awards for Activities that Contribute to Protecting the Environment
February 21 2024 15:28 JST
 
MHI Recognized by CDP as Being at the Leadership Level for Climate Change Earning A- score
February 19 2024 09:08 JST
 
Mitsubishi Power Receives Order for State-of-the-Art JAC Series GTCC Power Plant for Uzbekistan Navoi 3 Power Plant Project
February 13 2024 17:15 JST
 
More Press release >>

Latest Press Release


More Latest Release >>