Jan 21, 2021 10:05 JST

Source: Fujitsu Ltd

Fujitsu Delivers Cashless, Contactless Retail Experience for Masked Shoppers with Hygienic, Multi-Factor Biometric Authentication Technology

KAWASAKI, Japan, Jan 21, 2021 - (JCN Newswire) - Fujitsu Laboratories, Ltd. has announced the development of a new multi-factor biometric authentication technology to deliver an innovative shopping experience for the "New Normal" era, combining non-contact biometrics that filter the verification target through facial data with identification performed via palm vein recognition. This technology enables identification with greater than 99% accuracy even when the user wears a mask, and will be showcased at a concept cashless Lawson convenience store at the Fujitsu Technology Square office in Shin-Kawasaki, Japan (1), for a field trial starting from January 2021.

Fig. 1 Technology currently being verified
 

Fig. 2 Masks added to facial image data
 

Fig. 3 Image of the updated user interface
 

Fig. 4 Multi-factor biometric authentication terminal in use
 


Users wearing masks present challenges to conventional facial recognition filtering technologies because a large part of the face is obscured, rendering authentication impossible in some cases. With the newly developed technology, however, differences in the appearance depending on the presence or absence of the mask can be absorbed by generating a composite image that combines the mask with the face image and training the model, achieving filtering accuracy of greater than 99%, or equivalent to that without a mask. Fujitsu has additionally enhanced its existing palm vein authentication sensor technology by improving the user interface so that users know how close to position their hand from the sensor for smooth authentication. This technology was ranked 6th amongst 147 participating global vendors and 1st place amongst Japanese vendors (2) in the face authentication vendor test conducted by the United States' National Institute of Standards and Technology (NIST).

Development Background

In recent years, the use of biometric authentication technologies has been increasing, including in areas like the processing of payments at brick-and-mortar stores and in ID verification for events. Now, these technologies also promise to help limit the spread of COVID-19 by limiting human contact during transactions and verification processes. To this end, Fujitsu is accelerating the introduction of contactless user interfaces for authentication leveraging facial and palm vein recognition with a variety of field trials over the past year (Fig. 1).

Challenges

In many parts of the world, mask-wearing has been highlighted by health officials as an important tool to help prevent the spread of infectious diseases like the COVID-19 virus. However, when face authentication is performed while wearing a mask, most of the face is hidden, and the accuracy of this method can sometimes deteriorate. With this in mind, Fujitsu has worked to improve the accuracy of multi-factor biometric authentication at its pilot store by combining facial filtering technology with palm vein recognition. In addition, when considering the introduction of the system for general users in brick-and-mortar stores going forward, it will become essential to improve the user interface of the system to improve user-friendliness, allowing users to register and authenticate themselves without complex explanations or intervention from store clerks.

Newly Developed Technology

Fujitsu Laboratories has developed a data expansion machine learning technology that enables highly accurate filtering even when the target user is wearing a mask.

The features of the developed technology are as follows.

With typical facial recognition technology, when a user is wearing a mask only the exposed eye area is checked in order to extract features such as the shape and position of the face. While this method can help reduce the influence of wearing a mask over an accurate reading, it cannot extract the features of the entire face, presenting the possibility that the target user cannot be recognized due to insufficient data.

In order to reduce this effect, the newly developed technology generates an image of the user's face without a mask while taking into account the extraction of features of the entire face, like its shape and contours. This means that even when the user is wearing a mask, the user can be recognized against the corresponding facial image can be narrowed down from a large database with the same level of accuracy as without a mask. Specifically, the technology estimates the position of the face based on facial features such as the position of the eyes and nose, and based on the estimation results, an artificial mask is resized and reshaped then superimposed over the face image to generate a natural masked facial image. In addition, the system uses various types of masks in order to deal with situations in which masks of various colors, patterns and shapes are worn by users (Fig. 2). This makes multi-factor authentication more hygienic and easier to use by allowing people to undergo authentication without removing their mask.

Improved user interface

The user interface of the palm vein authentication system has also been improved to enable smoother use. A palm-shaped light has been added to the sensor, and the color and the pattern of the light changes according to the distance of the hand, so that the appropriate height for accurate authentication is apparent (Fig. 3). This allows people who are not familiar with palm vein authentication to adjust their palms to the appropriate height for smooth, contactless authentication (Fig. 4).

Outcomes

By using the newly developed technology and user interface, Fujitsu hopes to provide safer and more secure services while preventing the spread of infectious diseases in a variety of situations, including payments at brick and mortar stores using biometric authentication and personal identification at leisure facilities.

Future Plans

To make sure users can do the authentication process by themselves using the developed technology and improved UI, Fujitsu will introduce this technology to a system currently under verification(3) at a concept cashless Lawson convenience store in Shin-Kawasaki Technology Square in cooperation with Lawson, a major Japanese convenience store chain. Fujitsu will conduct verification tests from January 21, 2021 with the aim of putting the system into practical use by the end of FY 2021.

(1) a concept cashless Lawson convenience store the Fujitsu Technology Square office in Shin-Kawasaki
Since February 2020, Fujitsu has been participating in a POC conducted by Lawson, Inc. for cashier-less solutions at a location in its offices. Based on the results of the POC, Lawson has been working with the Fujitsu as well as America's Zippin to identify business and technical issues.
(2) This technology was ranked 6th amongst 147 participating global vendors and 1st place amongst Japanese vendors
In the facial recognition vendor test conducted by the United States' NIST in November 2020.
FRVT Face Mask Effects
(3) Fujitsu will introduce this technology to a system currently under verification
Refers to system provided by VCOGNITION TECHNOLOGIES, INC "Zippin". The system integrates devices such as cameras and weight sensors necessary for automatic payment, AI functions for recognizing customers and products, and linking functions with payment and inventory management.

About Fujitsu

Fujitsu is the leading Japanese information and communication technology (ICT) company offering a full range of technology products, solutions and services. Approximately 130,000 Fujitsu people support customers in more than 100 countries. We use our experience and the power of ICT to shape the future of society with our customers. Fujitsu Limited (TSE:6702) reported consolidated revenues of 3.9 trillion yen (US$35 billion) for the fiscal year ended March 31, 2020. For more information, please see www.fujitsu.com.

About Fujitsu Laboratories

Founded in 1968 as a wholly owned subsidiary of Fujitsu Limited, Fujitsu Laboratories Ltd. is one of the premier research centers in the world. With a global network of laboratories in Japan, China, the United States and Europe, the organization conducts a wide range of basic and applied research in the areas of Next-generation Services, Computer Servers, Networks, Electronic Devices and Advanced Materials. For more information, please see: http://www.fujitsu.com/jp/group/labs/en/.

Source: Fujitsu Ltd
Sectors: Electronics, Cloud & Enterprise

Copyright ©2024 JCN Newswire. All rights reserved. A division of Japan Corporate News Network.

Related Press Release


Fujitsu Limited announces recruitment plans
March 19 2024 09:34 JST
 
Fujitsu and AWS will launch a new Modernization Acceleration Joint Initiative to enable customers across industries to drive digital transformation with fast and secure legacy modernization
March 18 2024 15:12 JST
 
Japanese joint research group win Prime Minister's Award with ultra high-performance computing platform using jointly developed 64-qubit quantum computer
March 15 2024 09:19 JST
 
Fujitsu and Tokai National Higher Education and Research System collaborate on AI-based space weather research
March 14 2024 09:21 JST
 
GMO Research Activity Support & Technology launches brain MRI analysis tool developed on world class supercomputer Fugaku with Fujitsu Computing as a Service (CaaS)
March 12 2024 09:20 JST
 
Fujitsu and Carnegie Mellon University develop AI-powered social digital twin technology with traffic data from Pittsburgh
March 07 2024 09:25 JST
 
Fujitsu and Celonis Expand Strategic Global Partnership
February 26 2024 14:40 JST
 
Fujitsu introduces "Uvance Wayfinders", expanded and strengthened consulting capabilities to deliver cross-industry business value
February 22 2024 11:05 JST
 
Fujitsu delivers new supercomputer system to Japan Meteorological Agency to improve prediction accuracy for typhoons and torrential rain
February 21 2024 15:38 JST
 
Fujitsu collaborates with QuTech in development of new technology for freezing electronics to control diamond spin qubits
February 20 2024 20:28 JST
 
More Press release >>

Latest Press Release


More Latest Release >>