Feb 06, 2018 11:24 JST

Source: Hitachi, Ltd.

Hitachi: Functional Safety Controller "vCOSS S-zero" for UK ABWR Certified for SIL 3 according to IEC 61508
The design and development processes comply with the highest-level SIL 4(1)
requirements of IEC 61508 series functional safety standard.

TOKYO, Feb 06, 2018 - (JCN Newswire) - Hitachi, Ltd. (TSE: 6501) and Hitachi-GE Nuclear Energy, Ltd. has announced that the jointly developed functional safety controller "vCOSS S-zero" for the UK Advanced Boiling Water Reactor (UK ABWR) has been certified for Safety Integrity Levels (SIL) 3(1) according to IEC 61508 series functional safety standard, by German-based international third-party certifier TUV Rheinland Industrie Service GmbH (TUV Rheinland).

The certificate confirms the measures for fault avoidance (design and development processes) comply with the highest-level SIL 4(1) requirements of IEC 61508 series functional safety standard. This enables the product to be used in systems that require compliance with SIL 4(1), which was difficult to realize with conventional programmable functional safety controllers, if additional system level measures to meet SIL 4(1) requirements are applied. The "vCOSS S-zero" has also been certified for Security Level (SL) 1(2) according to IEC 62443-4 series cyber security standard through a combined assessment by TUV Rheinland.

Furthermore, the "vCOSS S-zero" was assessed as a part of the UK Regulators' Generic Design Assessment for UK ABWR, which was completed in December 2017. Its general approach for hardware design and development is recognized as meeting regulatory expectations.

IEC 61508 series is a set of international functional safety standard defined by the International Electrotechnical Commission(3) to realize protection through computer technologies. The standard defines requirements for electric, electronic or programmable electronic safety protection systems to detect an abnormal state in machines and facilities used in factories and plants and maintain safety, based on the concept of reducing risks to an allowable target level.

The "vCOSS S-zero" is a controller that activates safety protection functions to put a plant into a safe state in the event of an abnormal situation, independent of the control systems for the operation and monitoring of the plant.

It does not use firmware, OS or middleware, which are generally required for controllers, but implements system specific controls by combining hardware calculation elements. This achieves a high level of safety, reliability and security against cyber-attacks. The control logic is able to use floating point arithmetic calculations(4) .The calculation elements were developed in-house to enable safety evaluations meeting the SIL 4(1) requirements.

Hitachi-GE intends to incorporate the "vCOSS S-zero" as the functional safety controller for the nuclear facilities it provides to Horizon Nuclear Power, for their projects in the UK. In addition, because there are few programmable functional safety controllers available in the world whose design and development processes are recognized to comply with SIL 4(1) requirements, Hitachi seeks to expand the application to areas such as chemical plants and turbines for thermal power generation where a high level of safety and reliability is required.

(1) SIL 3, SIL 4: In IEC 61508 series functional safety standard, four Safety Integrity Levels (1 to 4) are defined as indicators of the safety performance in a system. SIL 4 is the highest level.
(2) SL 1: In IEC 62443-4 series cyber security standard for plant control systems, four Security Levels (1 to 4) are defined according to the degree of resistance to attacks. SL 1 indicates that a system can withstand unintentional attacks. Generally, controllers and safety protection devices alone can achieve up to SL 1.
(3) International Electrotechnical Commission: It is an organization that prepares and endeavors to spread international standards for electric and electronic technology for the further promotion of global economic growth and international trade.
(4) Floating point arithmetic calculation: An arithmetic calculation method for computers. As a computer has a fixed data size for each data type, part of a calculation result that exceeds the predefined number of digits cannot be expressed. The floating point arithmetic calculation method is used to handle a wider range of numbers.

About Hitachi-GE Nuclear Energy, Ltd.

Hitachi-GE, a joint venture established by Hitachi, Ltd. (TSE:6501) and GE in July 2007, as one of the world's leading comprehensive plant manufacturers, engages in the development, planning, design, manufacture, inspection, installation, pre-operation, and maintenance of nuclear reactor-related equipment and is able to execute integrated project management. Hitachi-GE has been involved with 23 reactors in Japan to date, including those currently under construction. For more information about Hitachi-GE, please visit http://www.hitachi-hgne.co.jp/en/index.html.

Contact:
Hitachi Ltd
Corporate Communications
Tel: +81-3-3258-1111
Source: Hitachi, Ltd.
Sectors: Energy, Alternatives

Copyright ©2024 JCN Newswire. All rights reserved. A division of Japan Corporate News Network.


Latest Release

More Latest Release >>